Your bathroom’s tub facets are an integral part of its functionality and aesthetics. However, as time goes on, they may develop problems or become outdated, necessitating replacement. While it may seem like a daunting task, removing tub facets is a relatively simple plumbing job that can be completed with the right knowledge and a few essential tools. In this comprehensive guide, we will walk you through the step-by-step process of removing tub facets safely and efficiently. Follow our instructions carefully, and you will have your old facets out in no time, ready to install new ones that will enhance the functionality and style of your bathroom.
Before you begin, it is important to gather the necessary tools and materials. You will need a pair of adjustable pliers, a basin wrench, a flat-head screwdriver, a Phillips-head screwdriver, and a bucket or bowl to catch any water that may leak out during the process. Additionally, if your facets have decorative caps or handles, you will need a small wrench or Allen wrench to remove them. Once you have gathered your tools, prepare the work area by turning off the water supply to the tub and opening the faucets to release any residual water. Spread towels or a tarp around the base of the tub to protect the floor from water or debris.
To begin the removal process, locate the two plastic or metal caps located at the base of the faucet handles. Use a flat-head screwdriver to pry off these caps, revealing the screws that hold the handles in place. Remove the screws and pull the handles straight up to detach them from the faucets. Next, locate the packing nut, which is a large nut located at the base of each faucet. Use the basin wrench to loosen the packing nuts by turning them counterclockwise. Once the packing nuts are loose, you should be able to remove the faucets by hand. If the faucets are still stuck, use the adjustable pliers to gently loosen them. Be careful not to damage the finish of the faucets with the pliers.
How To Remove Tub Facets
Removing tub facets is a relatively simple task that can be completed with a few basic tools. By following these steps, you can remove your tub facets quickly and easily.
-
Turn off the water supply
The first step is to turn off the water supply to your tub. This can be done by turning off the valves under the sink or by turning off the main water supply to your home.
-
Remove the old facets
Once the water supply is turned off, you can remove the old facets. To do this, use a wrench to loosen the nuts that hold the faucets in place. Once the nuts are loose, you can pull the faucets off of the tub.
-
Install the new facets
Now that the old faucets are removed, you can install the new ones. To do this, simply insert the new faucets into the holes in the tub and tighten the nuts until they are snug.
-
Turn on the water supply
Once the new faucets are installed, you can turn on the water supply and check for leaks. If there are any leaks, tighten the nuts until the leaks stop.
