For men, beards are often a defining facial feature that can enhance their appearance and boost their confidence. However, there may come a time when a change is desired and a beard needs to be removed from a photograph. With the advancements in photo editing software, removing a beard is now a relatively simple task that can be accomplished using a free and easy-to-use program like Photopea.
Photopea is an online photo editor that offers a wide range of features and tools, including the ability to remove objects from images using a technique known as greenscreening. Greenscreening involves using a solid-colored background, typically green, to isolate and remove an object from an image. In the case of removing a beard, the green background will be used to replace the area where the beard was originally located.
To remove a beard using greenscreen in Photopea, you will need to begin by selecting the beard area using the Quick Selection Tool. Then, you can use the Refine Edge Brush Tool to refine the selection and ensure that the edges of the beard are clean and precise. Once the beard area is selected, you can create a new layer and fill it with the green background color. Next, you will need to use the Subtract tool to subtract the beard area from the green background layer, effectively removing the beard from the image. Finally, you can use the Heal and Clone Stamp tools to blend the edges of the beard area with the skin, ensuring a natural and seamless finish.
Selecting the Beard Area
To begin the process of cutting out the beard area, follow these detailed steps:
1. Zoom In and View Details
Start by zooming in to get a closer look at the beard area. This will allow you to see the fine details and improve the precision of your selection.
2. Use the Magic Wand Tool
Select the Magic Wand tool from the left-hand toolbar. Set the Tolerance value accordingly to match the background near the beard. Click on the background area adjacent to the beard to sample its color. The Magic Wand will automatically select a region based on similar colors, making it easy to isolate the beard.
| Parameter |
Description |
| Tolerance |
Adjusts the range of colors included in the selection. Lower values result in more precise selections, while higher values create broader selections. |
| Anti-aliasing |
Smooths the edges of the selection, reducing jaggedness. |
| Contiguous |
Limits the selection to adjacent pixels with similar colors, preventing isolated areas from being included. |
3. Refine the Selection
The Magic Wand may not perfectly capture all areas of the beard. Use the Add to Selection and Subtract from Selection tools in the top toolbar to manually refine the selection. Add any missed beard areas and remove any unwanted background elements.
Copying and Pasting the Beard
Once you have selected the beard image, you can copy it by pressing Ctrl+C (Windows) or Command+C (Mac). Then, go back to the original image and press Ctrl+V (Windows) or Command+V (Mac) to paste the beard into the image. The beard will be pasted as a new layer, which you can move and resize to fit your face.
Masking the Beard
Next, you need to mask the beard so that it blends seamlessly with your face. To do this, select the beard layer and click on the “Add Layer Mask” button in the Layers panel. A black mask will be added to the beard layer. This mask will hide the beard wherever you paint black on it.
Refining the Mask
To refine the mask, you can use the Brush tool to paint black on the areas where you want to hide the beard. You can also use the Eraser tool to erase black from the mask to reveal the beard. Zoom in on the image to get a close-up view of the mask and make sure that there are no gaps or sharp edges.
Below is a table summarizes the steps for copying and pasting the beard in a little more detail:
| Step |
Action |
| 1 |
Copy the beard image by pressing Ctrl+C (Windows) or Command+C (Mac). |
| 2 |
Go back to the original image and press Ctrl+V (Windows) or Command+V (Mac) to paste the beard into the image. |
| 3 |
Select the beard layer and click on the “Add Layer Mask” button in the Layers panel. |
| 4 |
Use the Brush tool to paint black on the areas where you want to hide the beard. |
| 5 |
Use the Eraser tool to erase black from the mask to reveal the beard. |
Refining the Selection with Adjustment Layers
1. Black & White Adjustment Layer
Add a Black & White Adjustment Layer (Layer > New Adjustment Layer > Black & White). Adjust the sliders to increase the contrast and definition of the beard.
2. Curves Adjustment Layer
Add a Curves Adjustment Layer (Layer > New Adjustment Layer > Curves). Adjust the curve to enhance the beard’s contrast and separation from the background.
3. Levels Adjustment Layer
Add a Levels Adjustment Layer (Layer > New Adjustment Layer > Levels). Adjust the sliders to fine-tune the exposure, contrast, and brightness of the beard, ensuring it blends well with the background.
4. Hue/Saturation Adjustment Layer
Add a Hue/Saturation Adjustment Layer (Layer > New Adjustment Layer > Hue/Saturation). Adjust the hue to match the beard’s color to the background. You can also adjust the saturation to enhance the beard’s color.
5. Color Balance Adjustment Layer
Add a Color Balance Adjustment Layer (Layer > New Adjustment Layer > Color Balance). Adjust the shadows, midtones, and highlights to neutralize the beard’s color and balance it with the background.
6. Invert Mask to Refine Selection
For each adjustment layer, invert the mask (Edit > Invert Mask). This will refine the selection by masking out areas where the adjustment isn’t desired, such as the skin around the beard.
7. Feather and Blur Mask
For the Inverted Mask in the Black & White Adjustment Layer, go to Filter > Blur > Gaussian Blur. Set a small radius (e.g., 1-2 pixels) to create a soft transition around the edges of the beard. This helps blend the mask seamlessly into the background.
8. Merge Layers for Final Selection
Select all the adjustment layers (Shift + Click). Right-click and choose “Merge Layers.” This creates a single layer representing the refined selection of the beard.
| Adjustment Layer |
Function |
| Black & White |
Increase contrast and definition |
| Curves |
Enhance contrast and separation |
| Levels |
Fine-tune exposure, contrast, and brightness |
| Hue/Saturation |
Match beard color to background |
| Color Balance |
Neutralize and balance beard color |
Adding Final Touches
9. Adjusting the Beard’s Appearance
To enhance the realism of your cutout beard, you can make further adjustments to its appearance. Here’s a detailed walkthrough:
-
Adjust Opacity: Fine-tune the transparency of the beard by adjusting the opacity slider in the Layers panel. This allows you to blend the beard seamlessly with your original image.
-
Change Blend Mode: Experiment with different blend modes (e.g., Multiply, Overlay) to alter the beard’s interaction with the underlying image. This affects the color and lighting of the beard.
-
Use Layer Masks: Create a layer mask for the beard layer to selectively remove or hide portions of the beard. This provides precise control over its shape and visibility.
-
Apply Filters: Enhance the beard’s texture or depth by applying filters (e.g., Unsharp Mask, Gaussian Blur) from the Filters menu.
-
Add Highlights and Shadows: Create a new layer and use the Brush tool to add highlights or shadows to the beard, giving it a more three-dimensional look.
Remember, the goal is to achieve a natural and realistic appearance. By using these techniques, you can customize the beard to suit your preferences and create a convincing illusion.
Exporting the Image
Once you’re satisfied with your cut-out, you can export the image. Here are the steps:
- Click on the “File” menu at the top of the screen.
- Select “Export As” and then choose the file format you want to export the image in. PNG is a good choice for transparent images.
- In the “Export PNG Options” dialog box, select the following settings:
| Transparency |
Yes |
| Interlace |
None |
| Bit Depth |
8 |
- Click “OK” to export the image.
How To Cutout A Beard With Greenscreen In Photopea
Photopea is a free online photo editor with a wide range of tools and features. It has a greenscreen cutout tool that can be used to remove the background from an image of someone with a beard. This can be useful for creating a new look or for adding a beard to a person who doesn’t have one.
To cut out a beard with greenscreen in Photopea, follow these steps:
- Open Photopea in your web browser and import the image of the person with the beard.
- Click on the "Layer" menu and select "New Layer."
- In the "Layer Properties" panel, set the "Blend Mode" to "Screen."
- Use the "Eyedropper" tool to select the green color from the background.
- Click on the "Magic Wand" tool and click on the background to select all of the green pixels.
- Press the "Delete" key to remove the background.
- Use the "Eraser" tool to remove any remaining green pixels from the beard.
- Save the image.
People Also Ask
How can I cut out a beard without a greenscreen?
It is possible to cut out a beard without a greenscreen, but it is more difficult. You can use the “Pen Tool” to manually trace around the beard, or you can use a photo editing program that has a built-in beard cutout tool.
What is the best way to cut out a beard with a greenscreen?
The best way to cut out a beard with a greenscreen is to use a photo editing program that has a built-in greenscreen cutout tool. This will ensure that the beard is cut out accurately and without any unwanted artifacts.
How can I make my beard look more realistic?
There are a few things you can do to make your beard look more realistic. First, make sure that the beard is cut out accurately and without any unwanted artifacts. Second, use a photo editing program to add shadows and highlights to the beard. Finally, blend the beard with the skin tone of the person.
