If your Kenmore dryer is not heating up, one possible problem could be a faulty thermal cut-off. This is a safety device that trips when the dryer overheats, preventing damage to the appliance. Replacing a thermal cut-off is a relatively simple repair that can be completed in about 30 minutes.
Before you begin, unplug the dryer from the power outlet and allow it to cool completely. You will need a new thermal cut-off that is compatible with your Kenmore dryer. You can find the correct part number in your dryer’s user manual or by contacting Kenmore customer service. Once you have the new part, follow these steps to replace the thermal cut-off:
1. Remove the two screws that hold the back panel of the dryer in place. 2. Carefully lift the back panel off the dryer and set it aside. 3. Locate the thermal cut-off, which is usually located near the heating element. 4. Disconnect the two wires that are connected to the thermal cut-off. 5. Remove the old thermal cut-off by unscrewing the mounting bracket. 6. Install the new thermal cut-off by screwing it into the mounting bracket. 7. Connect the two wires to the new thermal cut-off. 8. Replace the back panel of the dryer and secure it with the two screws. 9. Plug the dryer back into the power outlet and test it to make sure it is working properly.
How To: Kenmore Thermal Cut-Off
Kenmore thermal cut-off is a safety device that automatically shuts off the power to the appliance if it overheats. This can help to prevent fires and other accidents. If your Kenmore appliance has stopped working, the thermal cut-off may have tripped. Here’s how to reset it:
- Unplug the appliance from the outlet.
- Locate the thermal cut-off. It is usually located on the back or bottom of the appliance.
- Press the reset button on the thermal cut-off. The button may be red or black.
- Plug the appliance back into the outlet and turn it on.
If the thermal cut-off has tripped again, there may be a problem with the appliance that needs to be repaired.
People Also Ask
What is a thermal cut-off?
A thermal cut-off is a safety device that automatically shuts off the power to an appliance if it overheats. This can help to prevent fires and other accidents.
How do I know if my thermal cut-off has tripped?
If your appliance has stopped working, the thermal cut-off may have tripped. You can check by pressing the reset button on the thermal cut-off. If the button pops back out, the thermal cut-off has tripped.
How do I reset my thermal cut-off?
To reset your thermal cut-off, follow these steps:
- Unplug the appliance from the outlet.
- Locate the thermal cut-off. It is usually located on the back or bottom of the appliance.
- Press the reset button on the thermal cut-off. The button may be red or black.
- Plug the appliance back into the outlet and turn it on.
What if my thermal cut-off keeps tripping?
If your thermal cut-off keeps tripping, there may be a problem with the appliance that needs to be repaired. You should contact a qualified appliance repair technician to diagnose and repair the problem.
