5 Ways to Fix Erratic Readings From an Aquarite Salt Board

5 Ways to Fix Erratic Readings From an Aquarite Salt Board

5 Ways to Fix Erratic Readings From an Aquarite Salt Board

If you’re experiencing erratic readings from your Aquarite salt board, don’t panic. There are a few simple steps you can take to troubleshoot the issue and get your readings back on track. First, check the probe to make sure it’s clean and free of debris. If the probe is dirty, it can give inaccurate readings. To clean the probe, simply remove it from the board and rinse it with clean water. Once the probe is clean, reinsert it into the board and check the readings again.

If cleaning the probe doesn’t solve the problem, you may need to calibrate the board. To calibrate the board, you’ll need a calibration solution. You can purchase a calibration solution from a pool supply store or online. Once you have the calibration solution, follow the instructions on the board to calibrate it. After the board is calibrated, check the readings again. The readings should now be accurate.

If you’re still having problems with erratic readings, you may need to replace the board. Boards can fail over time, and if the board is faulty, it can give inaccurate readings. To replace the board, simply remove the old board and install the new board. Once the new board is installed, check the readings again. The readings should now be accurate.

$title$

How To Fix Erratic Readings From Aquarite Salt Board | Youtube

If you’re experiencing erratic readings from your Aquarite salt board, there are a few things you can do to troubleshoot the issue. First, check to make sure that the salt board is properly calibrated. You can do this by following the instructions in the Aquarite user manual. Once the salt board is calibrated, you can try cleaning the salt board with a soft cloth. If the salt board is still giving erratic readings, you may need to replace it.

People also ask about How To Fix Erratic Readings From Aquarite Salt Board | Youtube

How do I reset my Aquarite salt board?

To reset your Aquarite salt board, follow these steps:

  1. Turn off the power to the Aquarite system.
  2. Remove the salt board from the system.
  3. Press and hold the reset button on the back of the salt board for 10 seconds.
  4. Reinstall the salt board into the system.
  5. Turn on the power to the Aquarite system.

How do I calibrate my Aquarite salt board?

To calibrate your Aquarite salt board, follow these steps:

  1. Turn off the power to the Aquarite system.
  2. Remove the salt board from the system.
  3. Connect the salt board to the Aquarite calibration kit.
  4. Turn on the power to the Aquarite system.
  5. Follow the instructions on the Aquarite calibration kit to calibrate the salt board.
  6. Turn off the power to the Aquarite system.
  7. Disconnect the salt board from the Aquarite calibration kit.
  8. Reinstall the salt board into the system.
  9. Turn on the power to the Aquarite system.